The miniature electric hoist is simple in structure and easy to install. It is suitable for lifting items weighing under 2T. It is especially suitable for lifting heavy articles from lower levels in high buildings. The electric hoist is equipped with an upper limit device, which can ensure that the lifting circuit can be automatically cut off when the hook rises to the limit position, to ensure safe operation.
The electric hoist can be customized according to customer needs. The major parts, such as motors, are produced in our factory, so that we can better control the quality and cost of products. Our products have been CE certified and exported to the United States, Russia, Japan, India, Vietnam and other countries.
Electric Cable Hoist WHA Overhead Hoist CraneThe WHA overhead hoist crane is a electric cable hoist manufactured by Wanhua. The hoist crane works under the voltage of 220V and is usually used to lift heavy objects. We have produced two kinds of material handling equipment with different structures, one is a single-hook hoist, and the other is a double-hook hoist, with the maximum lifting force of 1000kg.
Electric Hoist WHB Overhead Crane HoistThe main characteristic of WHB electric hoist, also called overhead crane hoist is that it can work under load continuously. We have modified the motor parts by increasing the number of stators and rotors, so that the product can work continuously for 24 hours, without any problems.
WHD Overhead Electric Crane HoistThis series of electric hoist works under the voltage of 100-120V and 380V, usually used to lift heavy objects, which is suitable for Japan, North Korea, the United States, Canada and other countries. We produce different types of electric hoists for various end users. The average volume of this product is 44*33*26cm, which is very convenient to install.
Electric Trolley HoistThe electric trolley hoist is designed for very limited height space applications, as its standard traveling height is only 3 meters. The unique design will balance the product on an I-beam and adjust itself according to the width of the I-beam rail. This product is suitable for I-beams with a width of 80-100 mm.
Overhead Crane HoistThe hoist can only move up and down, and the electric hoist trolley can only move left and right, which is not convenient for use in practical applications. The overhead crane hoist combines the hoist with the electric hoist trolley together, allowing it to move freely in four directions and making it more convenient to use.
If you can't find the product you need, please contact us and we will produce the best one for you.
Details of core components
The motor uses high quality copper wire which has good conductivity. The outer surface of the coil is covered with insulating material.
High precision helical gear can greatly reduce working noise.
The handle is equipped with an emergency stop switch making it safe to use.
The device can prevent motor from reversing and collision.
High quality wire rope offers good flexibility. Its tensile strength is more than 1770N/mm2.
Magnetic Brake Device
The great magnetic brake device has passed 72 hours of continuous full loading test, and the lifted weight did not slip.
Matters needing attention
Do not overload or use if you do not know the weight of the lifted object.
Don't pull the lifted object while working. Otherwise, the load of the electric hoist will increase and the electric hoist and wire rope will be overloaded easily.
When working, please use thick gloves to avoid scratches.
Do not use the micro electric hoist to lift people or use it in manned elevators.
Make sure that at least three rings of wire rope are retained on the cable drum to prevent the wire rope from falling off from the cable drum when the weight is too high.
Wanhua provides customers with a wide selection of lifting equipment. We design and produce electric hoists, chain hoists, air hoists, trolleys, pallet lift trucks, and much more. These products can be customized according to your voltage and weight needs. Contact us to learn more.